Electrolux EI30HI55KS Complete Owner's Guide (English) - Page 9
Prepare the Location
View all Electrolux EI30HI55KS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Blower Motor Systems Installation Dual Blower Motor Assembly A A.Wiring connection 8. Align mounting holes and install 6 x 16 mm bolts and 6.4 mm lock washers. A A. Bolt with lock washer B. Mounting hole B 9. Attach power cord connector from the hood insert to connector on wiring box. A. Wiring Box Connector B. Hood Insert Connector A B 6. To install blower motor assembly, slide the left mounting plate flange under the motor mounting bracket. 10. Install 10" round ducting damper with 4 - 4.2 x 8 mm mounting screws. A A B A.Motor mounting bracket B.Mounting plate left flange 7. Push the right end of the motor mounting plate down and snap it into the spring tab. NOTE: The spring tab should be outside the slot in the mounting plate. B B A. 10" round ducting damper B. Installation screws 11. Continue to Prepare the Location on page 12. A B A. Motor mounting plate B. Spring clip