Electrolux EI32AR65JS Complete Owner's Guide (English) - Page 6
Installation - trim kit
View all Electrolux EI32AR65JS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
6 Installation Required Tools You will need the following tools: This Use & Care Guide provides general installation and operating instructions for your model. We recommend using a service or kitchen contracting professional to install your refrigerator. Use the refrigerator only as instructed in this Use & Care Guide. Before starting the refrigerator, follow these important first steps. Location • Choose a place that is near a grounded, nonGFCI, electrical outlet. Do Not use an extension cord or an adapter plug. • If possible, place the refrigerator out of direct sunlight and away from the range, dishwasher, or other heat sources. • The refrigerator must be installed on a floor that is level and strong enough to support a fully loaded refrigerator. Installation • Allow the following clearances for ease of installation, proper air circulation, and plumbing and electrical connections: Sides 3/8" inch (9.5 mm) Top and Back 1 inch (25.4 mm) • Allow for trim kit if it to be installed with the unit. The refrigerator doors are designed to shut by themselves within a 20 degree opening. DO NOT install the refrigerator where the temperature will drop below 40°F (13°C) or rise above 110°F (43°C). The compressor will not be able to maintain proper temperatures inside the refrigerator. DO NOT block the toe grille on the lower front of your refrigerator. Sufficient air circulation is essential for the proper operation of your refrigerator. Refrigerator 3/8" (10mm) If your refrigerator is placed with the door hinge against a wall, you may have to allow additional space so the door can be opened wider.