Electrolux EI33AF80WS Complete Owners Guide - Page 14

14 WATER SUPPLY CONNECTION  5. With the steel clamp and screw, secure the water supply line (copper tubing only) NOTE to the rear panel of appliance as shown. Check with your local building authority 6. Coil the excess water supply line for recommendations on water lines and (copper tubing only), about 2½ turns, associated materials prior to installing your behind appliance as shown and new appliance. Depending on your local/ arrange coils so they do not vibrate or state building codes, Electrolux recom- wear against any other surface. mends for homes with existing valves its 7. Turn ON the water supply at shutoff valve and tighten any connections that leak. Smart Choice® water line kit 5305513409 (with a 6' Stainless Steel Water Line) and for homes without an existing valve, Electrolux 8. Reconnect the appliance to electrical recommends its Smart Choice® water line power source. kit 5305510264 (with a 20' copper water 9. To turn ice maker on, press and hold ICE MAKER on the appliance display for 3 seconds. line with self-tapping saddle valve). Please refer to ElectroluxAppliances.com for more information.