Electrolux EIDW1805KS Complete Owner's Guide (English) - Page 11
Care & Cleaning
View all Electrolux EIDW1805KS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Care & Cleaning 11 Burn Hazard Allow heating element to cool before cleaning the interior. Failure to do so can result in burns. Outside-Occasionally wash with a mild nonabrasive detergent and water. Rinse and dry. Inside-The inside of the dishwasher is self- cleaning with normal use. WINTERIZING A dishwasher left in an unheated place should be protected from freezing. Have a qualified person do the following: To Disconnect Service: 1. Turn off electrical power to the dishwasher at the supply source by removing fuses or tripping circuit breaker. 2. Shut off water supply. 3. Place a pan under the inlet valve. Disconnect water line from inlet valve and drain into pan. 4. Disconnect drain line from pump and drain water into pan. To clean stainless steel wipe with the grains. Use a Dishwasher Safe Detergent to help with the stains or discolorations. NEVER use products that contain Chlorine Bleach or Citric Acid. Important: The dishwasher motor is permanently lubricated at the factory and does not need to be oiled. Care of Drain Air Gap If a drain air gap was installed for your built-in dishwasher, check to make sure it is clean so the dishwasher will drain properly. Drain air gaps are usually mounted on countertop and can be inspected by removing the cover. A drain air gap is not part of your dishwasher and is not covered by this warranty. NOTE See Installation Instructions for more details on disconnecting and restoring service to your dishwasher. To Restore Service: 1. Reconnect the water, drain, and electrical power supply. 2. Turn on water and electrical power supply. 3. Fill both detergent cups and run dishwasher through a NORMAL WASH Cycle. 4. Check connections to make sure they do not leak. NOTE See Installation Instructions for more details on disconnecting and restoring service to your dishwasher.