Electrolux EIDW1805KS Installation Instructions (English) - Page 2
Installation Preparation
View all Electrolux EIDW1805KS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Installation Preparation PARTS SUPPLIED : Two #8 Phillips flat head wood screws, 5/8" long to secure dishwasher to underside of countertop (in literature package). Two Phillips head, color matched toekick screws (in literature package). 2 Wood Screws 2 Color Matched Toekick Screws Screw Type Hose Clamp MATERIALS YOU WILL NEED: Ferrule, compression nut and 90° Elbow (3/8" NPT external thread on one end, opposite end sized to fit water supply) Thread seal tape UL Listed wire nuts (3) MATERIALS FOR NEW INSTALLATIONS ONLY: Air gap for drain hose, if required Waste tee for house plumbing, if applicable Electrical cable or power cord, if applicable Screw type hose clamps Strain relief for electrical connections Hand shut-off valve Water line 3/8" min. copper Coupler for extending drain line, if applicable 90° Elbow, Ferrule and Compression Nut Hand Shutoff Valve Thread Seal Tape Wire Nuts (3) Waste Tee Electrical Cable (or Power Cord, if applicable) Hot Water Line Screw Type Air Gap Hose Clamps Strain Relief Coupler TOOLS YOU WILL NEED : Phillips head screwdriver 5/16" and 1/4" nutdriver 6" Adjustable wrench Level Carpenters square Measuring tape Safety Glasses Flashlight Bucket tocatch water when flushing the line Gloves FOR NEW INSTALLATIONS ONLY: Tubing Cutter Drill and Appropriate Bits Hole Saw Set Phillips Head Screwdriver Flashlight 1/4" and 5/16" Nutdriver 6" Adjustable Wrench Level Tubing Cutter Bucket Safety Glasses Carpenters Square Ruban à mesurer Gloves 2 Hole Saw Set Drill and Bits