Electrolux EIDW1815US Wiring Diagram English
Electrolux EIDW1815US Manual
 |
View all Electrolux EIDW1815US manuals
Add to My Manuals
Save this manual to your list of manuals |
Electrolux EIDW1815US manual content summary:
- Electrolux EIDW1815US | Wiring Diagram English - Page 1
is completed, the Clean LED will illuminate. When SANITIZE is selected, the SANITIZED led is illuminated once the cycle is ended. The water/service test is used to verify individual circuit and component function; It is accessed during the first 60 seconds after a power off SANITIZED reset and - Electrolux EIDW1815US | Wiring Diagram English - Page 2
the dry portion of the service test mode. Standard Dry Air the PCB. Trouble Shooting Tips Instruct customer/user. 3. Instruct customer/user on proper loading of dishes. 4. Incoming water temperature of 120°F is required to properly dissolve dishwashing detergents. Drain Pump Lower spray arm support
-
1 -
2
 |
 |
Cycle Selection Options
Model:
EIDW1815US0A
Press DELAY pad to select desired delay time,
then Press
START pad and close door in 4s.
the START pad.
Open the door to pause the running cycle, and press CANCEL,
the unit will stop after the drain cycle.
When SANITIZE is selected, the SANITIZED led is illuminated once the cycle is ended.
The Drying LED is illuminated during the drying cycle.
After the cycle is completed, the Clean LED will illuminate.
30
30
SANITIZED
During the whole test step, the
Washing, Drying,
Clean and Sanitized led flashs in turn.
??
Brown
GN
Green
Yellow
YE
Gray
GY
PF
.........
A power failure has occured
CLOSE
.........
Close and latch the door
'01-24'
..........
Hour(s) delay before start
'i1-i9';'id'
..........
Error code
RD
The Washing LED is illuminated during the washing cycle.
WH
Press HEAT DRY pad and hold for 3s, the unit will be locked,
and the LOCK led will illuminate.
Again, press HEAT DRY pad and hold for 3s, the unit will
be unlock and the LOCK led will be off.
********
FM
Cycle
Options available
Water usage
Cycle Time
AUTO
HEAT DRY
2.5–4.9 gal.
9.5–18.5 liters
120–155 mins.
HEAVY
SANITIZE, HI TEMP, OR
HEAT DRY
4.9 gal.
18.5 liters
155–160 mins.
NORMAL
2.5–4.9 gal.
9.5–18.5 liters
125–160 mins.
FAST
HEAT DRY
3.3 gal.
12.5 liters
60–100 mins.
RINSE
HEAT DRY
1.8 gal.
6.7 liters
20–55 mins.
SANITIZE, HI TEMP, OR
HEAT DRY
Press START pad and close the door in 4s.
Wash Cycles
Wash Options
Functions
Cycle Indicator
A16738601
The water/service test is used to verify individual circuit and
component function;
It is accessed during the first 60 seconds after a power off
reset and PF is shown in the display. Within 60 seconds
after PF is
displayed, press the Cancel and Normal pad
together and release, and then the unit will step through
the test cycle per the chart automatically.
Press Cancel pad to advance to the next step.
After test cycle is done, pres Cancel and hold 3s for quit.