Electrolux EIDW1815US Wiring Diagram English - Page 1

?A?16738601 Model: EIDW1815US0A RD GN Green WH Brown YE Yellow GY Gray Press START pad and close the door in 4s. Press DELAY pad to select desired delay time, then Press START pad and close door in 4s. the START pad. Open the door to pause the running cycle, and press CANCEL, the unit will stop after the drain cycle. Press HEAT DRY pad and hold for 3s, the unit will be locked, and the LOCK led will illuminate. Again, press HEAT DRY pad and hold for 3s, the unit will be unlock and the LOCK led will be off. PF.........A power failure has occured CLOSE.........Close and latch the door '01-24'..........Hour(s) delay before start 'i1-i9';'id'..........Error code The Washing LED is illuminated during the washing cycle. The Drying LED is illuminated during the drying cycle. After the cycle is completed, the Clean LED will illuminate. When SANITIZE is selected, the SANITIZED led is illuminated once the cycle is ended. The water/service test is used to verify individual circuit and component function; It is accessed during the first 60 seconds after a power off SANITIZED reset and PF is shown in the display. Within 60 seconds FM after PF is displayed, press the Cancel and Normal pad together and release, and then the unit will step through the test cycle per the chart automatically. Press Cancel pad to advance to the next step. After test cycle is done, pres Cancel and hold 3s for quit. ******** 30 30 Cycle Selection Options During the whole test step, the Washing, Drying, Clean and Sanitized led flashs in turn. Wash Cycles Wash Options Functions Cycle Indicator Cycle AUTO Options available HEAT DRY HEAVY SANITIZE, HI TEMP, OR HEAT DRY NORMAL SANITIZE, HI TEMP, OR HEAT DRY FAST HEAT DRY RINSE HEAT DRY Water usage 2.5-4.9 gal. 9.5-18.5 liters 4.9 gal. 18.5 liters 2.5-4.9 gal. 9.5-18.5 liters 3.3 gal. 12.5 liters 1.8 gal. 6.7 liters Cycle Time 120-155 mins. 155-160 mins. 125-160 mins. 60-100 mins. 20-55 mins.