Electrolux EIDW6405HT Product Specifications Sheet (English) - Page 2

Dishwasher EIDW6405H T Front 23 3/4" Left 23 7/8" (not including custom panel) 49 7/8" Right 22 1/2" 33 7/8" Adjustable to 34 7/8"* Door in 90° open position 27 3/8" *Height only adjustable to 34 11/16" max. when installed in 35" max. standard cabinetry cutout Custom Panel Refer to web for detailed door panel Specifications construction and installation instructions. 23 5/32" 13/32" 30 1/8" max. Thickness: 3/4" Weight: 12 lbs. max. (including handle) 23 9/32" 2 Pilot drill holes* ( 1/8" dia. x 1/4" max.depth) 23 5/32" 17/32" 13 15/32" 13/32" 14 17/32" 9/16" 23" 6 Pilot drill holes 13/32" ( 1/8" dia. x 3/8" max.depth) Note: All handle 23 11/16" attachment screws must be *Optional holes for adding 1/2"- #7 screws flush / recessed which slip into rectangular openings of below panel metal panel to help locate custom door surface. (Handle panel for other outside screw attachment not included.) 3 1/2" min.to 4 1/2" max. Water inlet and power supply location (middle bottom rear) 90° 34" min. to 35" max.** 24" min. 3" 90° Electrical, water, and drain lines must be confined to shaded area Preferred drain areas 3" 18" 3" **NOTE: 35" max. height for standard cabinetry cutout. 13/4" (5/16" min. clearance required from unit to 13/4" 13/4" underside of countertop.) 13/4" 24" Built-In Panel-Ready Dishwasher Specifications • Product Weight - 93 Lbs. • Voltage Rating @ 120V / 60 Hz / 15 Amps • Connected Load (kW Rating) @ 120 Volts = 1.44 kW (For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation.) • Amps @ 120V = 9 Amps • Always consult local and national electric & plumbing codes. • Water Pressure - Hot water line to dishwasher must provide between 15 and 120 pounds per square inch (psi). • Make sure location has right drain, water and electrical outlets to make connections. • Keep back free of drain, water & electrical supply. • Electrical and water supplies should enter cabinet opening on floor, or through back or side walls, as shown in shaded areas. • Connections preferably located toward left side of dishwasher. Do not cross drain, water or electrical lines in front of motor, blower or frame. • Minimum clearance of 5/16" required from unit to underside of countertop. • Leveling legs supplied to adjust height. (Note: Height only adjustable to 34-11/16" max. when installed in 35" max. standard cabinetry cutout to allow for 5/16" min. clearance.) • When installing adjacent to wall, cabinet or other obstruction that extends beyond front edge of unit, allow 2" minimum clearance between opened door and obstruction. • When installing at end of cabinet line, sides must be fully enclosed. • Do not install unit under a cooktop, damage may occur. Custom Panel Specifications • Handle not included, match to custom cabinetry. • Panel Dimensions - 30-1/8" H max. x 23-11/16" W x 3/4" D • Panel Weight - 12 Lbs. max (including handle) • Refer to web for detailed custom panel construction and installation instructions. Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxappliances.com for detailed instructions. Optional Accessories • Mesh Basket - (PN # 154653001). Electrolux Major Appliances, N.A. USA • 250 Bobby Jones Expressway • Augusta, GA 30907 • 1-877-4electrolux (1-877-435-3287) • electroluxappliances.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxappliances.ca EIDW6405H 03/09 © 2009 Electrolux Home Products, Inc. High standards of quality at Electrolux Home Products, Inc. mean we are constantly working to improve our products. We reserve the right to change specifications or discontinue models without notice. Printed in the U.S.A.