Electrolux EIFLW55IKG Use and Care Guide - Page 5

important, instructions - user manual

Page 5 highlights

Safety important Safety instructions, con't PREVENT INJURY • To prevent shock hazard and assure stability during operation, the washer must be installed and electrically grounded by a qualified service person in accordance with local codes. Installation instructions are packed in the washer for installer's reference. Refer to INSTALLATION INSTRUCTIONS for detailed grounding procedures. If the washer is moved to a new location, have it checked and reinstalled by a qualified service person. • To prevent personal injury or damage to the washer, the electrical power cord of the washer must be plugged into a properly grounded and polarized 3-prong outlet. The third grounding prong must never be removed. Never ground the washer to a gas pipe. Do not use an extension cord or an adaptor plug. • Follow package directions when using laundry products. Incorrect usage can produce poisonous gas - resulting in serious injury or death. • Do not combine laundry products for use in 1 load unless specified on the label. • Do not mix chlorine bleach with ammonia or acids such as vinegar. PREVENT INJURY AND DAMAGE TO THE WASHER To prevent serious personal injury and damage to the washer: • All repairs and servicing must be performed by an authorized servicer unless specifically recommended in this Use & Care Guide. Use only authorized factory parts. • Do not tamper with controls. • Do not install or store the washer where it will be exposed to the weather. • Do not install on carpet. Install washer on a solid floor. It may be necessary to reinforce the floor to prevent vibration or movement. • To reduce the risk of electric shock, disconnect this appliance from the power supply before attempting any user maintenance. Turning the controls to the OFF position does not disconnect this appliance from the power supply. • To prevent injury, do not reach into the washer while parts are moving. Before loading, unloading or adding items, push in the cycle selector knob and allow the drum to coast to a complete stop before reaching inside. • This washer is equipped with an electrical overload protector. The motor will stop if it becomes overheated. The washer will automatically restart after a cool down period of up to 30 minutes, if the washer has not been manually turned off during this time. • Failure to comply with these warnings could result in serious personal injuries. Grounding type wall receptacle / Do not, under any circumstances, cut, remove, Power cordw_th 3-pr;ng gr;_nded plug

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Safety
important
Safety
instructions,
con't
PREVENT
INJURY
• To prevent
shock hazard and assure stability
during operation,
the washer must be installed
and electrically
grounded
by a qualified
service
person in accordance
with local codes.
Instal-
lation instructions
are packed
in the washer for
installer's
reference. Refer to
INSTALLATION
INSTRUCTIONS
for detailed grounding
proce-
dures. If the washer is moved to a new location,
have it checked
and reinstalled
by a qualified
service
person.
• To prevent
personal injury or damage to the
washer, the electrical
power cord of the washer
must be plugged
into a properly grounded
and
polarized
3-prong
outlet. The third grounding
prong must never be removed.
Never ground the
washer to a gas pipe. Do not use an extension
cord or an adaptor
plug.
• Follow package
directions
when using laundry
products.
Incorrect
usage can produce
poison-
ous gas - resulting
in serious injury or death.
• Do not combine
laundry products
for use in 1
load unless specified on the label.
• Do not mix chlorine
bleach with ammonia
or
acids such as vinegar.
PREVENT
INJURY
AND DAMAGE
TO THE
WASHER
To prevent serious
personal injury and damage to
the washer:
• All repairs and servicing
must be performed
by
an authorized
servicer
unless specifically
rec-
ommended
in this
Use & Care Guide.
Use only
authorized
factory
parts.
• Do not tamper
with controls.
• Do not install or store the washer where it will be
exposed
to the weather.
• Do not install on carpet.
Install washer on a solid
floor. It may be necessary
to reinforce the floor to
prevent vibration
or movement.
• To reduce the risk of electric
shock, disconnect
this appliance
from the power supply
before
attempting
any user maintenance.
Turning the
controls to the OFF position
does not disconnect
this appliance
from the power supply.
• To prevent
injury, do not reach into the washer
while parts are moving. Before loading, unload-
ing or adding
items, push in the cycle selector
knob and allow the drum to coast to a complete
stop before reaching inside.
• This washer
is equipped
with an electrical
over-
load protector.
The motor will stop if it becomes
overheated.
The washer will automatically
restart
after a cool down period of up to 30 minutes,
if the washer has not been manually turned off
during this time.
• Failure to comply
with these warnings
could
result in serious personal injuries.
Grounding type
wall receptacle
/
Do not, under
any circumstances,
cut, remove,
Power
cord
w_th
3-pr;ng
gr;_nded
plug