Electrolux EW27MO55HS Product Specifications Sheet (English) - Page 2

Built-In Microwave EW27MO55H S *Note: When used in combination with another Electrolux built-in product, a minimum clearance of 2 1/8" required from bottom of Built-In Microwave cutout to top edge of companion product's faceplate, leaving a 2" visible gap between both 2" product faceplates. min. 27" 24" min. min. 22 1/4" 27" 24 7/8" 23 1/2" 20 3/4" 21" min. 21 1/2" max. Allow at least 15" clearance for door depth when open 21 11/16" Power supply location (left bottom rear) Bottom Duct Assembly 2" (visible gap)* 36" min. 120V/60Hz grounded outlet Outlet should NOT be located within shaded area Bottom Duct Assembly CL 6" 4" 21" min. 21 1/2" max. 18" 25 1/8" min. 25 5/8" max. 20 1/8" min. Full plywood base required to support 150 lbs. 25 1/8" min. 25 5/8" max. 20 1/8" min. 27" Built-In Microwave Specifications • Product Weight - 79 Lbs. • Voltage Rating - 120V / 60 Hz / 15 Amps • Connected Load (kW Rating) @ 120 Volts = 1.6 kW (For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation.) • Amps @ 120 Volts = 13.7 Amps • Always consult local and /or national electric codes. • Allow at least 15" clearance for oven door depth when open. • Minimum required distance from floor is 36". • Minimum 20-1/8" deep oven cutout dimension is critical for proper installation for oven and faceplate to fit flush against cabinet front. • Full oven base of solid plywood or similar material required, capable of supporting 150 Lbs. • Base must be level and cabinet front must be square. • Grounded outlet should NOT be located in shaded area, as indicated. • Built-In Microwave is NOT approved to be used under counter. • Built-In Microwave can be built in alone or is approved to be used in combination with any Electrolux Electric Single Wall Oven and / or Warmer Drawer. (Refer to model-specific Combination Installation Specification pages on web.) • When used in combination with another Electrolux built-in product, a minimum clearance of 2-1/8" required from bottom of Built-In Microwave cutout to top edge of companion product's faceplate, leaving a 2" visible gap between both product faceplates. Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxappliances.com for detailed instructions. Electrolux Major Appliances, N.A. USA • 250 Bobby Jones Expressway • Augusta, GA 30907 • 1-877-4electrolux (1-877-435-3287) • electroluxappliances.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxappliances.ca EW27MO55H 01/09 © 2009 Electrolux Home Products, Inc. High standards of quality at Electrolux Home Products, Inc. mean we are constantly working to improve our products. We reserve the right to change specifications or discontinue models without notice. Printed in the U.S.A.