Electrolux EW30DS65GS Installation Instructions (All Languages) - Page 2

is centered in the counter opening while - range

Page 2 highlights

30" DUAL FUEL SLIDE-IN RANGE INSTALLATION INSTRUCTIONS (Models with an Electric Oven and a Gas Cooktop) NOTE: 1. Do not pinch the power supply cord or the flexible gas conduit between the range and the wall. 2. Do not seal the range to the side cabinets. 3. 24" (61 cm) minimum clearance between the cooktop and the bottom of the cabinet when the bottom of wood or metal cabinet is protected by not less than ¼" (0,64 cm) flame retardant millboard covered with not less than No. 28 MSG sheet metal, 0,015"(0,4 mm) stainless steel, 0,024"(0,6 mm) aluminum, or 0,020" (0,5 mm) copper. 30" (76,2 cm) minimum clearance when the cabinet is unprotected. 4. For cutouts below 22 7/8"(58,1 cm), appliance will slightly show out of the cabinet. 5. Allow at least 19 ¼" (48,9 cm) clearance for door depth when it is open. Door Open B C A D Side Panel * IMPORTANT: To avoid cooktop breakage for cutout width (E dimension) of more than 30 1/16" (76,4 cm), make sure the appliance is centered in the counter opening while pushing into it. Raise leveling legs and the rear adjustable wheels at a higher position than the cabinet height (see page 3), insert the appliance in the counter and then level. Make sure the unit is supported by the leveling legs at the front and the wheels at the back and NOT by the cooktop itself. 22 7/8"(58,1 cm) min. 23 1/4"(59,05 cm) max. (see Note 4) FRONT OF CABINET 1 1/8" (2,86 cm) FRef. A. HEIGHT B. WIDTH 35 5/8" (90,5 cm) 30" (76,2 cm) - 36 5/8" (93 cm) C. COOKTOP WIDTH 31½" (80 cm) D. DEPTH TO FRONT OF RANGE 28 5/16" (71,9 cm) E. CUTOUT WIDTH* (Countertop and Cabinet) 30±1/16" (76,2±0,15 cm) F. CUTOUT DEPTH 21 3/4" (55,2 cm) Min. 22 1/8" (56,2 cm) Max 24" (61 cm) Min. with backguard G. HEIGHT OF COUNTERTOP 36 5/8" (93 cm) Max. 35 3/4" (90,8 cm) Min. 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

2
30" DUAL FUEL SLIDE-IN RANGE INSTALLATION INSTRUCTIONS
(Models with an Electric Oven and a Gas Cooktop)
1 1/8"
(2,86 cm)
FRONT OF
CABINET
F
Ref.
22 7/8"(58,1 cm) min.
23 1/4"(59,05 cm) max.
(see Note 4)
NOTE:
1. Do not pinch the power supply cord or the
flexible gas conduit between the range
and the wall.
2. Do not seal the range to the side cabinets.
3. 24" (61 cm) minimum clearance between
the cooktop and the bottom of the
cabinet when the bottom of wood or
metal cabinet is protected by not less than
¼" (0,64 cm) flame retardant millboard
covered with not less than No. 28 MSG
sheet metal, 0,015"(0,4 mm) stainless
steel, 0,024"(0,6 mm) aluminum, or
0,020" (0,5 mm) copper.
30" (76,2 cm) minimum clearance when
the cabinet is unprotected.
4. For cutouts below 22 7/8"(58,1 cm),
appliance will slightly show out of the
cabinet.
5. Allow at least 19 ¼" (48,9 cm) clearance
for door depth when it is open.
* IMPORTANT:
To avoid cooktop breakage
for cutout width (E dimension) of more than
30 1/16" (76,4 cm), make sure the appliance
is centered in the counter opening while
pushing into it. Raise leveling legs and the
rear adjustable wheels at a higher position
than the cabinet height (see page 3), insert
the appliance in the counter and then level.
Make sure the unit is supported by the
leveling legs at the front and the wheels
at the back and NOT by the cooktop
itself.
A
D
C
B
Door Open
Side Panel
A
. HEIGHT
B
.
WIDTH
C.
COOKTOP
WIDTH
D
.
DEPTH TO
FRONT OF RANGE
E
.
CUTOUT WIDTH*
(Countertop and
Cabinet)
F
.
CUTOUT
DEPTH
G
.
HEIGHT
OF COUNTERTOP
35 5/8" (90,5 cm)
- 36 5/8" (93 cm)
30" (76,2 cm)
31½" (80 cm)
28 5/16" (71,9 cm)
30±1/16" (76,2±0,15 cm)
21 3/4" (55,2 cm) Min.
22 1/8" (56,2 cm) Max
24" (61 cm) Min. with
backguard
36 5/8" (93 cm) Max.
35 3/4" (90,8 cm)
Min.