Electrolux EW30EC55G Installation Instructions - Page 2

Countertop

Get Electrolux EW30EC55G - 30inch Electric Cooktop PDF manuals and user guides View all Electrolux EW30EC55G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

Overhead Cabinet Should Not Exceed a Maximum Depth of 13" (33 cm) Clearance Between the Top of the Cooking Platform and the Bottom of an Unprotected Wood or Metal Cabinet• _ 24" (61 cm) Min. when Bottom of Wood or Metal Cabinet is Protected by Not Less Than 1/8" (0.3 cm) Flame Retardant Millboard Covered With Not Less Than No. 28 MGS Sheet Steel, 0.015" (0.4 mm) Stainless Steel, 0.024" (0.6 mm) Aluminum or 0.020" (0.5 mm) Copper• [ K Min• Recommended i | Distance Between Rear e of Cutout and Surface Above "_ CNoeuarnetsetrtoCpombustible 1 0" ( 25.4 cm) 18" G (45.7 cm) J Min. From Edge of Cooktop to Nearest Combustible Wall (Either Side of Unit)• 2 1/2" (6.4 cm) Min. From E Jge of Cutout to Front Edge of Countertop Install junction box at a location which will be easy to reach and that will not interfere with the cooktop installation• We suggest 12" (30.48cm) lower than the countertop. Letters on this figure refer to chart on front page except for J, I( & L. If a drawer is present underneath, allow at least 10" (25.4cm) of clearance below the countertop. Never store flammable products in the drawer• Toeliminate the risk of burns or fire by reaching over heated surfaces, cabinet storage space located above the cooktop should be avoided• If cabinet storage is provided, risk can be reduced by installing a range hood that projects horizontally a minimum of 5" (12•7 cm) beyond the bottom of the cabinets• 30" (76.2 cm) 36"(914 cm) 7½" (19.1 cm) 7½"(19.1 cm). 2" (5.1 cm) 2" (5.1 cm) 30" (72.6 cm) 36" (91.4 cm) Figure 2 - COUNTERTOP CUTOUT OPENING 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
Overhead Cabinet Should Not Exceed a
Maximum Depth of 13" (33 cm)
Clearance Between the
[
K Min• Recommended
i
|
Top of the Cooking
Distance Between Rear
Platform and the Bottom
of an Unprotected
Wood
or Metal
Cabinet•
_
24" (61 cm) Min. when
Bottom of Wood or Metal
Cabinet
is Protected by
Not Less Than 1/8"
(0.3
cm) Flame Retardant
Millboard
Covered
With
Not Less Than No. 28
MGS Sheet Steel, 0.015"
(0.4 mm) Stainless
Steel, 0.024"
(0.6 mm)
Aluminum
or 0.020"
(0.5
mm) Copper•
e of
Cutout
and
"_
Nearest
Combustible
Surface
Above
Countertop
18"
G
(45.7
cm)
1 0"
( 25.4 cm)
J Min. From Edge of
Cooktop
to Nearest
Combustible
Wall
(Either Side of Unit)•
2 1/2" (6.4 cm) Min. From E Jge
of Cutout to Front Edge of
Countertop
Install junction
box at a
location which will be easy
to reach and that will not
interfere with
the cooktop
installation• We suggest
12" (30.48cm)
lower than
the countertop.
Letters on this figure refer to chart on front page except for J, I( & L.
If a drawer is present
underneath,
allow at least
10" (25.4cm) of clearance
below the countertop.
Never store
flammable
products in the
drawer•
Toeliminate the risk of burns or
fire by reaching over heated surfaces, cabinet
storage space located above the cooktop should
be avoided• If cabinet storage is provided, risk
can be reduced by installing a range hood that
projects horizontally a minimum of 5" (12•7 cm)
beyond the bottom of the cabinets•
30" (76.2 cm)
7½" (19.1 cm)
2" (5.1 cm)
30" (72.6 cm)
36"(914 cm)
7½"(19.1 cm).
2" (5.1 cm)
36" (91.4 cm)
Figure 2 - COUNTERTOP
CUTOUT
OPENING
2