Electrolux EW30GF65GW Use and Care Manual - Page 16
Setting Surface Controls
UPC - 012505544156
View all Electrolux EW30GF65GW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
16 Setting Surface Controls Operating single burners 1. Push the desired gas surface control knob in and turn counterclockwise out of the OFF position Fig.1. 2. Release knob and rotate to (lite) position. Visually check that the needed burner has lit. 3. To adjust, push the knob in and turn counterclockwise to a flame size setting that best fits your need. Operating Min-2-Max™ double burner 1. Push right front surface control knob in and turn counterclockwise out of the OFF position -Fig. 1. 2. Release the knob and rotate to the (lite) position. Note: Although all electronic surface ignitors will spark at the same time, only the selected surface burner will lite. 3. Visually check that both the inner and outer rings are lit -Fig. 4. When both burners are lit, continue to turn the control knob counterclockwise to adjust to the desired flame size. Burner locations Fig. 1 4. If only the inner burner is needed, continue to rotate the gas control knob counterclockwise somewhere past grey area -Fig. 2. 5. Adjust the inner flame to desired size -Fig. 3. 2 Standard burners -9,500 BTU- best for most surface cooking requirements. Large burner -14,000 BTU- best for bringing large quantities of liquid to boil or when preparing large quanities of food. Min-2-Max™ double burner -18,000 BTUCapibilities of large burner combined with a simmer burner. Perfect Simmer™ burner -5,000 BTU- best for simmering delicate sauces, melting chocolates, etc. Fig. 3 Fig. 2 Fig. 4