Electrolux EW30GS75KS Complete Owner's Guide (English) - Page 51

Care and Cleaning 51 Cleaning cooktop, burner grates, caps and heads Double ring burner cap The glass in the double ring is designed to fit loosely. Clean with normal non abrasive glass type cleaner and thoroughly dry before replacing. Burner heads Lift the burner cap from the burner head. The surface burner heads are secured to the cooktop and must be cleaned in place. For proper gas flow it may be necessary to clean the burner heads and slots. To clean, first use a clean DAMP cloth to soak up any spills. Remove any food from between the burner slots using a small nonabrasive brush like a toothbrush and afterwards wipe using a damp cloth. For stubborn soils located in the slots, use a small-gauge wire or needle to clean. Should you experience ignition problems it may be that an ignition port hole is partially blocked with soil (see figs 1 & 2). With the burner head in place, use a small wire gauge needle or the end of a paper clip to clear the ignition port or ports. Slots Ignition port Orifice port Ignition port Slots Orifice port Figure 2 - Double ring burner head (Models equipped with double ring burner only) Orifice port Figure 1 - Cooktop burner head (All burners except Double ring burner)