Electrolux EW30IC60IS Installation Instructions (All Languages) - Page 6

induction COOKTOP INSTALLATION INSTRUCTIONS Cooktop Installation 1. Visually inspect the cooktop for damage. Also make sure all cooktop screws are tight (see Figure 7). WARninG Do not remove the spring spacers on the edges of the cooktop. These spacers center the cooktop in the space provided. The cooktop must be centered to prevent excess heat buildup that may result in heat damage or fire (see Figure 9). 4. Fix the cooktop to the bracket using the screws supplied (see Figure 9). Hole located under the burner box to fix the retainer bracket. Spring Spacer (8) Screws Figure 7 2. Install the retainer brackets. See Figure 8. The retainer brackets MUST be installed, to meet local codes or, in their absence, with the National Electrical Code ANSI/NFPA No. 70-latest edition (see Figure 8). 3. Set the cooktop into the countertop cutout. Cooktop Countertop Spring Spacer Retainer Bracket Figure 8 Position brackets on unit cutout center line Retainer bracket (2) as shown. Figure 9 Checking Operation Refer to the Use and Care Guide for operation. cAution Do not touch cooktop glass or elements. They may be hot enough to burn you. Before You Call for Service Read the Before You Call for Service Checklist and operating instructions in your Use and Care Guide. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. Refer to your Use and Care Guide for service phone numbers. NOTE: Do not use caulking compound; cooktop should be removable for service when needed. 6