Electrolux EW30IC60IS Product Specifications Sheet (English) - Page 2

Electrolux Major Appliances, N.A. - specifications

Page 2 highlights

Induction Cooktops EW30IC60IS 30" Induction Cooktop Specifications • Product Weight - 45 Lbs. • Single phase 3- or 4-wire cable, 120/ 240 or 120 / 208 Volt, 60 Hertz, fused on both sides of line with ground. • Connected Load (kW Rating) @ 240 / 208 Volts = 7.7 /6.7 kW • Amps @ 240 / 208 Volts = 32.0 / 32.0 Amps • Recommended Circuit Breaker - 40 Amps • Always consult local and national electric codes. • Allow 2" space beneath cooktop or optional platform to clear electrical cable and allow space for installation of junction box on wall at back of cooktop. Position center of junction box 10" inward from right side of cooktop cutout, and 12" down from underside of countertop. • Overhead cabinetry should not exceed a 13" maximum depth. • Allow 30" minimum clearance between top of cooktop and bottom of unprotected wood or metal overhead cabinetry. • Absolute minimum horizontal distance between overhead cabinets installed to either side of appliance must be no less than 30". • Allow 24" minimum clearance when bottom of wood or metal overhead cabinet is protected by not less than 1/8" flame-retardant millboard covered with not less than No. 28 MGS sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper. • Allow 2" minimum clearance between rear edge of cutout and nearest combustible surface above countertop. • Allow 7-1/2" minimum clearance from edge of cooktop to nearest combustible wall on either side of unit. • Installation of drawers beneath cooktop requires minimum 10" clearance beneath countertop surface and assured clearance for electrical connection. • To reduce risk of fire when using overhead cabinetry, install range hood that projects horizontally a recommended minimum of 5" beyond bottom of cabinets. • Induction Cooktop model EW30IC60I is approved to be used over any Electrolux Electric Single Wall Oven. (Refer to Electric Cooktop Installation Over 30" / 27" Electric Single Wall Oven Specifications page on web.) • Induction Cooktop model EW30IC60I is approved to be used in combination with any Electrolux 30" Downdraft Vent. (Refer to modelspecific Downdraft Vent product page on web for detailed countertop preparation specifications.) Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxappliances.ca for detailed instructions. Optional Accessories • Granite Countertop Installation Kit - (PN # 903061-9010). Electrolux Major Appliances, N.A. CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxappliances.ca EW30IC60IS 12/10 © 2010 Electrolux Home Products, Inc. High standards of quality at Electrolux Home Products, Inc. mean we are constantly working to improve our products. We reserve the right to change specifications or discontinue models without notice. Printed in Canada

  • 1
  • 2

High standards of quality at Electrolux Home Products, Inc. mean
we are constantly working to improve our products. We reserve the right
to change specifications or discontinue models without notice.
Electrolux Major Appliances, N.A.
CANADA
5855 Terry Fox Way
Mississauga, ON L5V 3E4
1-800-265-8352
electroluxappliances.ca
EW30IC60IS
12/10
© 2010 Electrolux Home Products, Inc.
Printed in Canada
Induction Cooktops
EW30IC60IS
30" Induction Cooktop Specifications
Product Weight – 45 Lbs.
Single phase 3- or 4-wire cable, 120/240 or 120/208 Volt, 60 Hertz,
fused on both sides of line with ground.
Connected Load (kW Rating) @ 240/208 Volts = 7.7/6.7 kW
Amps @ 240/208 Volts = 32.0/32.0 Amps
Recommended Circuit Breaker – 40 Amps
Always consult local and national electric codes.
Allow 2" space beneath cooktop or optional platform to clear electrical
cable and allow space for installation of junction box on wall at back of
cooktop. Position center of junction box 10" inward from right side of
cooktop cutout, and 12" down from underside of countertop.
Overhead cabinetry should not exceed a 13" maximum depth.
Allow 30" minimum clearance between top of cooktop and bottom of
unprotected wood or metal overhead cabinetry.
Absolute minimum horizontal distance between overhead cabinets
installed to either side of appliance must be no less than 30".
Allow 24" minimum clearance when bottom of wood or metal overhead
cabinet is protected by not less than 1/8" flame-retardant millboard
covered with not less than No. 28 MGS sheet steel, 0.015" stainless
steel, 0.024" aluminum or 0.020" copper.
Allow 2" minimum clearance between rear edge of cutout and nearest
combustible surface above countertop.
Allow 7-1/2" minimum clearance from edge of cooktop to nearest
combustible wall on either side of unit.
Installation of drawers beneath cooktop requires minimum 10"
clearance beneath countertop surface and assured clearance for
electrical connection.
To reduce risk of fire when using overhead cabinetry, install range hood
that projects horizontally a recommended minimum of 5" beyond
bottom of cabinets.
Induction Cooktop model EW30IC60I is approved to be used over any
Electrolux Electric Single Wall Oven.
(Refer to Electric Cooktop
Installation Over 30"/27" Electric Single Wall Oven Specifications page
on web.)
Induction Cooktop model EW30IC60I is approved to be used in
combination with any Electrolux 30" Downdraft Vent.
(Refer to model-
specific Downdraft Vent product page on web for detailed countertop
preparation specifications.)
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxappliances.ca for detailed instructions.
Optional Accessories
Granite Countertop Installation Kit – (PN # 903061-9010).