Electrolux EW36EC55GB Dimensions - Page 2

Electric Cooktops EW36EC55G S, EW36EC55G W, EW36EC55G B 36" 13" max. cabinet depth 36 3/4" 19 1/4" 34 5/8" 4" x 8" opening to 2" min. recommended route armoured cable distance between rear edge of cutout and nearest combustible if base is present Plywood base (optional) surface above countertop 21 3/4" 30" min. for unprotected cabinet 24" min. for 18" min. protected surface 3 1/8" 7" 9" min. 7 1/2" min. to nearest combustible wall (either side of unit) 20 3/8" min. 25" min. 20 5/8" max. 24" 2 1/2" min. from edge of cutout to front edge of countertop 35 3/4" min. 36" max. Side View Countertop Countertop Front 3 1/8" 3 1/2" 7" 7 1/2" Rear Cooktop 36" Electric Touch-Control Cooktop Specifications • Product Weight - 58 Lbs. • Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz AC only electrical supply with ground required on separate circuit fused on both sides of line. • Connected Load (kW Rating) @ 240 / 208 Volts = 10.2 / 7.7 kW • Amps @ 240 / 208 Volts = 42.5 / 37.0 Amps • Recommended Circuit Breaker - 40 Amps • Always consult local and national electric codes. • Allow 2" space beneath cooktop or optional platform to clear electrical cable and allow space for installation of junction box on wall at back of cooktop. Position center of junction box 10" inward from right side of cooktop cutout, and 12" down from underside of countertop. • Overhead cabinetry should not exceed a 13" maximum depth. • Allow 30" minimum clearance between top of cooktop and bottom of unprotected wood or metal overhead cabinetry. • Absolute minimum horizontal distance between overhead cabinets installed to either side of appliance must be no less than 36". • Allow 24" minimum clearance when bottom of wood or metal overhead cabinet is protected by not less than 1/8" flame-retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper. • Allow 2" minimum clearance between rear edge of cutout and nearest combustible surface above countertop. • Allow 7-1/2" minimum clearance from edge of cooktop to nearest combustible wall on either side of unit. • Installation of drawers beneath cooktop requires minimum 10" clearance beneath countertop surface and assured clearance for electrical connection. • To reduce risk of fire when using overhead cabinetry, install range hood that projects horizontally a recommended minimum of 5" beyond bottom of cabinets. • Touch-Control Cooktop model EW36EC55G is approved to be used over any Electrolux Electric Single Wall Oven. (Refer to Electric Cooktop Installation Over 30" / 27" Electric Single Wall Oven Specifications page on web.) • Touch-Control Cooktop model EW36EC55G is approved to be used in combination with any Electrolux 36" Downdraft Vent. (Refer to modelspecific Downdraft Vent product page on web for detailed countertop preparation specifications.) Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxappliances.com for detailed instructions. Optional Accessories • Granite Countertop Installation Kit - (PN # 903061-9010). • Griddle Plate - (PN # 318251611). Electrolux Major Appliances, N.A. USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-877-4electrolux (1-877-435-3287) • electroluxappliances.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxappliances.ca EW36EC55G 07/11 © 2011 Electrolux Home Products, Inc. High standards of quality at Electrolux Home Products, Inc. mean we are constantly working to improve our products. We reserve the right to change specifications or discontinue models without notice. Printed in the U.S.A.