Electrolux EWED65HTS Installation Instructions - Page 16
Water, connection, con't, Steam, Model
View all Electrolux EWED65HTS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
16 Installation Instructions Water connection, con't (Steam Model only) 1. if your installation has nom tor the COLD water supply to accept the "V' connects directly, thread the gY" connector to the COLD water supply and snug it by hand; then tight an Il miotlisi wlha pima. re NOTE Ityou wereabletoInstalthe"r connector direct to the COLD water supply, please slUp to step 5. 2. it there is not rocm to Install the nr connector directly, thread the short extension hose on to the COLD water supply and snug it by hand then tighten It another 2/3 turn with pliers. S. Thread the wr connector to the shot extenslan hose and snug it by hand; then tighten It another 2/3 turn with pliers. 4. Connect the COLD Inlet hose for the washer to the "r connelor and snug it by hand; than tighten It another 2/3 turn with pliers. 5. Connect the straight end otthe lorg hosePm the Kit to the other outlet on the "V" connector and snug It by hand. Correct the hose's 90' coupling to tho Crass wator Inlot on tho bad. of the dryer and snug it by hand. lighten each correction ot the dryer Inlet hose another 2'3 turn with pliers. O. TUm on the water and CROCK for leaks at an corrections. INFECT MUCCl/3N ORNTH ECIENSCOI WATER NISICN OFMER Awe ,%\ °OLDWATER SISAY ROSE TO WASHER