Electrolux EWFLS65ITS Use and Care Guide - Page 29

Operating User Interface Features Setting Preferences, continued INSTALL CYCLE Run the INSTALL CYCLE before operating the washer the first time. Remove all items from the washer drum and press start. For more information on performing the washer INSTALL CYCLE, refer to the Installation Instructions accompanying this washer. If the washer has been installed according to Installation Instructions, INSTALL PASSED - DOOR CRFI BE OPENED will be displayed and the washer is ready to use. If the washer was not installed properly, 170 LURTER OPEFI LURTER URLUES, LURTER HOSES - EHECH LURTER HOSES or CRLL SERUICE 877 H3S 3287 will be displayed to indicate the installation error. sdect The errors may result from the following conditions: . nO UJRTER --Water inlet hoses have not been attached to water supply or water supply valves have not been turned on. Install hoses correctly and turn on water supply valves. . C::HECHHOSES --The hot inlet hose may have been connected to the cold water supply and the cold inlet hose may have been connected to the hot water supply. Check hoses for correct supply connection. If incorrect, disconnect hoses and connect to correct inlets according to Installation Instructions. . CRLL SERUICE 877 H3S 3287--Error can only be corrected by calling a qualified technician (1-877-435-3287). Repeat the INSTALL CYCLE when corrections are completed.