Electrolux EWMED65HSS Installation Instructions - Page 15
Water connection Steam Model only
![]() |
UPC - 012505378928
View all Electrolux EWMED65HSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Installation Instructions 15 Water connection (Steam Model only) 1. Turn off COLD water supply to washer, 2. Remove COLD inlet hose from COLD water supply and inspect for rubber washer. Replace washer if it is torn or worn out. RUBBER WASHER MUST BE PRESENT AND UNDAMAGED COLD INLET HOSE TO WASHER 3. Momentarily turn on COLD supply and run some water into a bucket or container to clear any contaminants in the line. 4. Remove hose kit from dryer drum and inspect hose couplings for proper placement of rubber washers. RUBBER WASHERS MUST BE PRESENT
![](/manual_guide/products/electrolux-ewmed65hss-installation-instructions-7942b96/15.png)
15
Water connection (Steam Model only)
Installation Instructions
Turn off COLD water supply to washer,
1.
Remove COLD inlet hose from COLD water
2.
supply and inspect for rubber washer. Replace
washer if it is torn or worn out.
Momentarily turn on COLD supply and run
3.
some water into a bucket or container to clear
any contaminants in the line.
Remove hose kit from dryer drum and inspect
4.
hose couplings for proper placement of rubber
washers.
RUBBER WASHER
MUST BE PRESENT
AND UNDAMAGED
COLD INLET HOSE
TO WASHER
RUBBER WASHERS
MUST BE PRESENT