Electrolux EWMED70JSS Complete Owner's Guide (English) - Page 21

LINE DRY, ANTI STATIC, anti static, DELAY START, delay start, select, start

Page 21 highlights

Operating Instructions 21 Options, continued LINE DRY Select this option to simulate hanging your laundry in a summer breeze combined with the wrinkle-releasing benefits of tumble action. Since drying times are calculated with the dryer's automatic moisture sensors and heat is radically reduced or eliminated, cycle time will be lengthened. As a result, depending on moisture content of load, overall energy consumption decreases. ANTI STATIC The anti static option injects steam into the clothing just before cycle completion to reduce static. DELAY START Use delay start to select a drying time convenient to your schedule or during off-peak energy hours. The start of any cycle can be delayed for 30 minutes to 22 hours. Select the delay start option and then press the button under the plus (+) or minus (-) symbols to scroll to the delayed time setting desired. Press the select button and the delay time will be displayed. Time will begin counting down when you press start. NOTE While counting down during delay start, you will notice your dryer periodically tumbling for a few minutes without heat to redistribute the load, maximizing load freshness.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

21
Operating Instructions
LINE DRY
Select this option to simulate hanging your laundry
in a summer breeze combined with the wrinkle-re-
leasing benefits of tumble action. Since drying times
are calculated with the dryer’s automatic moisture
sensors and heat is radically reduced or eliminated,
cycle time will be lengthened. As a result, depending
on moisture content of load, overall energy con-
sumption decreases.
ANTI STATIC
The
anti static
option injects steam into the clothing
just before cycle completion to reduce static.
DELAY START
Use delay start to select a drying time convenient
to your schedule or during off-peak energy hours.
The start of any cycle can be delayed for 30 min-
utes to 22 hours. Select the
delay start
option and
then press the button under the plus (
+
) or minus
(
-
) symbols to scroll to the delayed time setting de-
sired. Press the
select
button and the delay time
will be displayed. Time will begin counting down
when you press
start
.
NOTE
While counting down during
delay start
, you will
notice your dryer periodically tumbling for a few
minutes without heat to redistribute the load,
maximizing load freshness.
Options, continued