Electrolux EWMGD65IMB Use and Care Guide - Page 7
Operating Instructions
UPC - 012505380426
View all Electrolux EWMGD65IMB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Getting Started Operating Instructions 7 To operate your dryer, follow these basic steps: 1. Check and clean the lint filter. (See page 8.) 2. Load the dryer. (See page 8.) 3. Select the desired cycle. (See page 9, pages 11-14 and page 29.) 4. Select desired settings and options. (See page 9, page 17, page 18, and pages 19-20.) 5. Start the dryer. (See page 10.) Normal Operating Sounds You may or may not hear the following sounds from your new dryer: A. WATER VALVE (Steam models only.) The flow of water is controlled by electric solenoids. During operation there may be a clicking sound as the valve opens and closes to control the water flow. B. SUSPENSION ROLLERS The dryer drum is supported by a set of suspension rollers. At times there may be a thumping or rolling sound when the dryer starts. This may happen if the dryer has not been in use for a period of time, or after a heavy load has remained in the dryer drum for an extended period, creating a temporary flat spot on the edge of the roller. The noise should dissipate as the dryer operates and the flat spots smooth out. C. PERFECT TUMBLE™ When the reversingaction option of perfect tumble™ is selected, you will hear the intermittent sound of the dryer stopping, momentarily pausing, then restarting in the opposite direction. D. AIR FLOW SYSTEM Your dryer is equipped with a high volume air handling system. In some installations there may be some sounds associated with air movement throughout the dryer, including the air duct, blower, and exhaust system. This is normal and can vary with load size and type. E. GAS VALVE (Gas models only.) The flow of gas is controlled by electric solenoids. During operation A B C F E D there may be a clicking sound as the valve opens and closes to control the gas flow. F. GAS BURNER (Gas models only.) When the burner is operating, there may be sounds generated as the air flow mixes with the gas flame. This noise is normal and will only occur when the gas is ignited in the combustion tube.