Electrolux EWMGD65IMB Installation Instructions - Page 23
I Reattaching Latch Plate, J Reattaching Hinge, K Reattaching Door to Front Panel
UPC - 012505380426
View all Electrolux EWMGD65IMB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Reversing Door 23 I) Reattaching Latch Plate 1 Rotate latch plate and move to opposite side of door above indicator. 2 Reattach with 2 long, course-thread, counter-sunk screws. K) Reattaching Door to Front Panel 1 Use side locating pins to align hinge and install 1 short, fine-thread, counter-sunk screw in center hole of hinge side. J) Reattaching Hinge 1 Rotate hinge and move to opposite side of door above hole plug. 2 Reattach with 4 long, course-thread, counter-sunk screws. 2 Install other 2 short, fine-thread, countersunk screws in upper and lower holes of hinge side. 3 Install 2 short, course-thread, panhead screws through face of hinge plate. 4 Close door and test operation of latch.
23
Reversing Door
I) Reattaching Latch Plate
1
Rotate latch plate and move to opposite side
of door above indicator.
2
Reattach with 2 long, course-thread,
counter-sunk screws.
J) Reattaching Hinge
1
Rotate hinge and move to opposite side of
door
above hole plug.
2
Reattach with 4 long, course-thread,
counter-sunk screws.
K) Reattaching Door to Front Panel
1
Use side locating pins to align hinge and
install 1 short, fine-thread, counter-sunk
screw in center hole of hinge side.
2
Install other 2 short, fine-thread, counter-
sunk screws in upper and lower holes of
hinge side.
3
Install 2 short, course-thread, panhead
screws through face of hinge plate.
4
Close door and test operation of latch.