Electrolux FER641FS User Instructions - Page 2

TEMPERATURE PERM PRESS/COLORS KNITS/DELICATES MEDIUM HEAT LOW HEAT REGULAR/WHITES HIGH HEAT AIR FLUFF * NO HEAT * ON OFF * SOME MODELS START COOL DOWN 20 30 40 50 TIMED DRY REGULAR 60 70 START AUTOMATIC PERM PRESS/COLORS PRESS SAVER MORE DRY LESS DRY Cycle Selection Turn cycle selector clockwise to desired cycle and setting. Each cycle ends with a cool down period. The heat automatically turns off and the load continues to tumble for 5-10 minutes. This reduces wrinkling and makes items easier to handle during unloading. Drying time varies depending on size and dampness of load, weight and fabric type. Room temperature and humidity, type of installation and electrical voltage or gas pressure can also affect drying time. Automatic Perm Press/Colors Cycle This cycle is best for permanent press, knit and delicate items. Drying time is determined automatically at the temperature selection of your choice. • Medium heat is suggested for permanent press items. • Low heat is suggested for knit and delicate items. If the dried load cannot be removed promptly, the cycle selector will advance to the Press Saver/Fabric Sentry setting where unheated tumbling continues for 40 minutes to help reduce wrinkling. Unless the Cycle Signal has been turned off (some models), it will sound briefly every 5 minutes as a reminder to remove the load. Automatic Regular/Whites Cycle This cycle is best for cotton items that can be tumble dried. Drying time is determined automatically at the temperature selection of your choice. This cycle is best for items of similar fabric, weight and construction. • For items requiring more drying time, set cycle selector on MORE/MAX • For items requiring less drying time, set cycle selector on LESS /MIN Timed Dry Regular Cycle This cycle provides up to 70 minutes of drying time at the temperature selection of your choice. Energy Saving Tips • Keep the lint screen clean and exhaust the dryer correctly. • Sort laundry properly and select proper temperature and cycle settings. Choose an automatic dry cycle whenever possible for accurate drying time. • Dry only full loads. Single items and small loads usually take longer to dry. • Avoid overloading, adding wet items to a partially dry load, and overdrying. • Dry one load after another to take advantage of a warm dryer. • Opening the door needlessly causes warm air to escape, which prolongs drying time. • If possible, use the dryer on low humidity days. • Install the dryer in an area where the room temperature is at least 45°F (7°C). P/N 134145400A (0503)