Electrolux S3686D User Manual - Page 10

GK GL GM GJ GB 10 ENGLISH HOW TO USE CAUTION: Do not plug in cleaner until you understand all controls and features. To Clean Bare Floors and Rugs FIG. 6 Step 1: Attach wands to hose handle. Step 2: Place floor tool on end of wand. Step 3: For models with telescopic wands, extend wands by pushing lock button down and pulling on lower wand until reaching desired height (Fig. 6). Step 4: Adjust to maximum suction by closing the slip ring GK on the hose handle (Fig. 6). Step 5: Rotate swivel cord hook GL on bottom of canister to release cord (Fig. 7). Step 6: Plug cord into appropriate outlet. Step 7: Push on/off switch GM . Press once to turn on. Press again to turn off (Fig. 8). FIG. 7 To Clean Stairs, Upholstery and Window Treatments (see pages 6-7 for accessory details) Step 1: Attach combination tool, crevice tool or turbo nozzle (on some models only) to the end of the hose. If additional reach is needed place wand on hose handle first. Step 2: Adjust to minimum suction by opening the slip ring GK on the hose handle (Fig. 6). Step 3: Rotate swivel cord hook GL on bottom of canister to release cord (Fig. 7). Step 4: Plug cord into an appropriate outlet. Step 5: Push on/off switch GM . Press once to turn on. Press again to turn off (Fig. 8). To Use Blower Port FIG. 8 GA Step 1: Remove HEPA filter (on some models only). See pages 14-15 for details. Step 2: Detach hose GB from front of canister GA and attach to the blower port GJ on the back side of the canister (Fig. 9). Step 3: Rotate swivel cord hook GL on bottom of canister to release cord (Fig. 7). Step 4: Plug cord into appropriate outlet. Step 5: Push on/off switch GM . Press once to turn on. Press again to turn off (Fig. 8). FIG. 9