Electrolux SC785AT Owners Guide - Page 8
Cord Retainer, Handle Collapse Button, Cord Storage Hooks, Handle Release Pedal, Reset Button, Reset
UPC - 023169108967
View all Electrolux SC785AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
HOW TO USE 4 Cord Retainer When preparing to use vacuum, firmly push the electrical cord down into the cord retainer. This will place the electrical cord out 4 CORD of the way while you vacuum. RETAINER HANDLE 5 Handle Collapse Button 5 COLLAPSE To collapse the handle from the BUTTON upright position, press handle collapse button, rotate handle down until latch in hand grip CORD 6 STORAGE locks onto the body. HOOKS HANDLE 7 RELEASE PEDAL 8 RESET BUTTON 9 RESET LIGHT 6 Cord Storage Hooks This unit has two convenient cord storage hooks attached to the handle. Wind the cord around the hooks and fasten the plug to the cord to prevent unwinding. 7 Handle Release Pedal The handle release pedal is located next to the floor between the two wheels on the back of the cleaner. Step on the handle release pedal and pull back handle to find a comfortable operating position. Handle will automatically lock into storage position when handle is rotated into upright position. 8 Reset Button This unit uses a cogged, non-stretch belt. If a large object causes the brush roll to jam, the brush roll motor shuts off and the Reset Light illuminates. Turn off and unplug the unit. Check the brush roll for debris and clean if needed. Press the reset button, plug in the unit and turn on to continue cleaning. 9 Reset Light The reset light is a LED light that illuminates when the brush roll jams. See reset button above for actions to take when this light comes on. 8