Electrolux Z7040 User Guide - Page 3
Operating Instructions, Controls, General Information, Usage - air cleaner
View all Electrolux Z7040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
GENERAL INFORMATION (continued) Rating Plate The model, type, and serial number are indicated on the rating plate located on the back of the cleaner. For prompt and complete service information, always refer to these numbers when inquiring about service. MODEL TYPE SERIAL NO. VOLTS AMPS. HERTZ SERVICE INFORMATION: USA1-800-282-2886 Canada 1-800-282-2886 Model & Type Serial No OPERATING INSTRUCTIONS 12 3 4 5 7 8 11 1. Air outlet grills 2. Reset button for filter replacement 3. Audio Sensor 4. Display 5. Fan Speed Control 6. Air inlet grills 6 9 10 7. Pre-filter Door 8. Carrying Handle 9. Power Cord 10. Compartment for unused cord 11. Top cover release button (On both sides of air cleaner.) CONTROLS C Automatic Mode A This position adjusts the fan speed to the noise level in the room.This automatic B mode senses room noise to increase or decrease fan speed. This mode is a good choice when A entertaining. Automatic Mode B This position adjusts the fan speed to the degree of air contamination in the room. Manual Mode C This position provides a manual setting for the fan speed. O is off, 3 is highest speed. USAGE All models are designed to run continuously with the fan speed set to (1). When required, they can be run at higher speeds (2) and (3). The best results are achieved by leaving the air cleaner on around the clock. (it uses less power than most light bulbs). 3