Emerson CR280 Owners Manual - Page 6

OPERATION (CONTINUED) REVERSING THE DOOR POSITION Caution: To avoid injury to yourself and/or property, we recommend someone assist you during the door reversal process. •Ensure the appliance is unplugged and empty. •Adjust the two leveling feet to their highest position. •We recommend you have someone to assist you. Tools required •Phillips head screwdriver •Flathead screwdriver NOTE: To take the door off it is necessary to tilt the appliance backward. You should rest the appliance on something solid e.g. a chair just below the top panel so you can access the bottom of the refrigerator. DO NOT lay the appliance completely flat as this may damage the coolant system. 1 2 Start by removing the bracket from the bottom of the refrigerator. Unscrew the two screws from the bottom bracket. Remove the foot from opposite side. Self-Tapping Screws/Bottom Bracket/Foot 3 4 Plastic cover Slide the door down, away from the hinge pin located on the top of the door. Remove the plastic cover from door hinge first. Then unscrew the two screws from top braket and replace on the other side. 6