Emerson DTE516 Owners Manual - Page 17

OPERATION (CONTINUED) DIGITAL ANTI-SHOCK SYSTEM This CD player has a built-in, 45-second Anti-Shock system that cuts down on CD skipping, which is useful when using the CD player in the car. Read the steps below to understand the Anti-Shock System. 1 2 MIN SEC / PAUSE Open the CD compartment lid by pressing the CD Door OPEN button and then following the illustration above. Insert a CD, then press the PLAY/PAUSE (®p) 1button to turn the unit on. 3 4 The Anti-Skip system will activate automatically. Within a few seconds, the "ANTI" indicator will indicate music signals are stored in memory. When the memory is full, "ANTI" will stop flashing and the disc rotation will drop to save power consumption. If the CD player is subject to vibration during playback, "ANTI" will flash. During the vibration, the music should continue to play the signals stored in the memory until the CD player can read the music data properly from the disc. NOTES: • The Anti-Skip System provides for continuous sound output when the unit is subject to vibration, but it will not correct errors, such as a defective or dirty CD. 16