Emerson DTE622 Owners Manual - Page 5

LOADING AND UNLOADING FILM LOADING FILM 1. Push the Back Cover Release (16) to open the Back Cover (15); the Film Counter (1) will automatically reset to "S". 2. Insert standard 35mm film into the Film Chamber (11) by placing the film onto the Film Take-up Spool (14). 3. Turn the Film Advance Wheel (13), while making sure the film engages properly in the gear of the Film Sprocket Wheel + (12). 4. Close the Back Cover (15). - 5. Turn the Film Advance Wheel (13), then press the Shutter Release button (2). 6. Repeat step 5 until the Film Counter (1) indicates "1". UNLOADING FILM 1. After taking the last picture, press and hold the Film Rewind button (7) on the bottom of the camera. 2. Lift the handle of the Film Rewind Crank (6) outward, then turn clockwise to rewind the film into the film case until no pressure is felt. 3. Push the Back Cover Release (16) to open the back cover (15), remove film and develop. 4