Emerson NR51 Owners Manual - Page 12

Programmed Playback

Get Emerson NR51 PDF manuals and user guides View all Emerson NR51 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

PROGRAMMED PLAYBACK This feature allows you to program up to 20 tracks on a disc for playback in any desired order. Note: You cannot program tracks while a disc is playing. If the disc is playing press the STOP button first before beginning the programming steps below: Program 1.) Press the PROGRAM button to enter the Program Mode. The Program number briefly shows '0 1', then '0 0'and the Program indicator flash. Program 2.) Press the F.SKIP or B.SKIP buttons to select the first track number you wish to enter in the program memory. Example: Track Number '0 8'. 3.) When the desired track number appears on the display, press the PROGRAM button again to enter that track in memory. The Program number briefly shows '0 2', then '0 0'flashes. Program 4.) Repeat Steps 2-3, selecting a different track number each time until you have entered up to 20 tracks in the program memory. Note: You may program the same track number to play multiple times in the program sequence if desired. 5.) Press the PLAY/PAUSE button to begin Programmed Playback. The Program indicator stops flashing and remains 'on'. Playback will begin with the first track you programmed and will continue until the last programmed track has played. Program NR51_011604.p65 11 11 16/1/2004, 10:46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
11
PROGRAMMED PLAYBACK
This feature allows you to program up to 20 tracks on a disc for playback in any
desired order.
Note:
You cannot program tracks while a disc is playing. If the disc is playing
press the
STOP
button first before beginning the programming steps below:
1.)
Press the
PROGRAM
button to enter the Program Mode.
The Program number briefly shows ‘0 1’
, then ‘
0 0
’
and the
Program
indicator flash.
2.)
Press the
F.SKIP
or
B.SKIP
buttons to select the first track
number you wish to enter in the program memory.
Example: Track Number ‘0 8’
.
3.)
When the desired track number appears on the display, press
the
PROGRAM
button again to enter that track in memory.
The Program number briefly shows ‘0 2’
, then ‘
0 0
’flashes.
4.)
Repeat Steps 2-3, selecting a different track number each time until you have
entered up to 20 tracks in the program memory.
Note:
You may program the same track number to play multiple times in
the program sequence if desired.
5.) Press the
PLAY/PAUSE
button to begin Programmed
Playback. The
Program
indicator stops flashing and remains
‘on’
. Playback will begin with the first track you programmed
and will continue until the last programmed track has played.
Program
Program
Program
Program
NR51_011604.p65
16/1/2004, 10:46
11