Emerson PD5802 Owners Manual - Page 24
Playing Cassette Tapes
View all Emerson PD5802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
PLAYING CASSETTE TAPES 1.) Press the FUNCTION button to select TAPE mode. The display shows correct time and the TAPE indicator appears. 2.) Open the cassette door by pressing the Stop/Eject key. 3.) Place a pre-recorded cassette tape into the slots on the inside of the door with the exposed tape facing up and the full reel on the right side. Close the cassette door. 4.) Press the cassette Play key to begin playback. 5.) Adjust the VOLUME, EQ and DBBS controls as desired. 6.) To advance the tape rapidly press the F. Fwd desired point press the Stop/Eject key. key. When you reach the 7.) To rewind the tape rapidly press the Rewind desired point press the Stop/Eject key. key. When you reach the 8.) When the tape ends the Automatic Stop System releases the Play key and shuts off the tape motor. You may then open the cassette door, remove your tape, turn it over and play the other side if desired. 9.) When you are finished listening press the Stop/Eject key to stop the tape, open the door, remove the tape and close the door. If you are playing a tape and then change to the RADIO or CD function be sure to press the Stop/Eject key to disengage the tape mechanism. This prevents excess wear and tear on the mechanism. IMPORTANT: Always press the Stop/Eject key to shut off the tape motor before opening the cassette door to remove your tape. The Automatic Stop System does not function in the F. Fwd and Rewind modes. When the tape ends in the F. Fwd and Rewind modes the motor continues to run. You must press the Stop/Eject key to shut off the motor before opening the door to remove your tape. 23 PD5802_ib031803.p65 23 18/3/2003, 11:06