Epic Fitness A35t Treadmill English Manual - Page 9
If You Do Not Connect The Con
View all Epic Fitness A35t Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
5. With the help of a second person, hold the console assembly (D) near the Upright (96). Connect the Upright Wire (92) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, connect the pulse wires (E). Make sure to connect the pulse wires on the right side (not shown) also. 5 Console Wire 92 6. With the help of a second person, hold the console assembly (D) near the left handrail 6 assembly (B). Raise the console assembly enough to position the wires (F) so that they will not get pinched as you set the console assembly on the left handrail assembly. Be careful not to pinch any wires. See the inset drawing. Make sure that the console assembly (D) is flush against the handrail assemblies (B, C) in the locations shown by the arrows. Attach the console assembly (D) to the handrail assemblies (B, C) with four 5/16" x 3/4" Screws (1), four 5/16" Flat Washers (6), and four 3/8" External Star Washers (4) as shown (only one side is shown). Start all four Screws and then tighten them. 9 D 92 E 96 D F B 4 6 1 96 C B D