Epic Fitness El 1710 Elliptical English Manual - Page 8
Left Gel Pad not shown to the Left Pedal
View all Epic Fitness El 1710 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
5. Identify the Right Pedal (14), the Right Gel Pad (55), and the Right Pedal Arm (12), which are 5 marked with "Right" stickers, and orient them as shown. Set the Right Gel Pad (55) on the Right Pedal Arm (12). Then, set the Right Pedal (14) on the Right Gel Pad. Attach the Right Pedal (14) to the Right Pedal Arm (12) with two M6 x 50mm Screws (62), two M6 x 12mm Screws (111), and four M6 Washers (112). Attach the Left Pedal (not shown) and the Left Gel Pad (not shown) to the Left Pedal Arm (not shown) in the same way. 14 55 12 112 112 111 111 62 62 6. See drawing 6a. Locate the Pedal Arm Roller 6a (32) on the Right Pedal Arm (12). Set the Pedal Arm Roller on the Ramp (130). See drawing 6b. Apply grease to the axle on the right Crank Arm (39). Orient a Pedal Arm Sleeve (46) so that the flat side is facing the elliptical. Slide the Pedal Arm Sleeve onto the axle on the right Crank Arm (39). Attach the Pedal Arm Sleeve with an M8 x 25mm Screw (121), a Large Axle Cover (113), and an M8 Washer (95). Next, pull upward on the Latch (50) on the Right Pedal Arm (12). Press the Right Pedal Arm onto the Pedal Arm Sleeve (46). Make sure that the Right Pedal Arm latches into place. Repeat this step on the other side of the elliptical. 6b 130 32 12 12 Grease 50 39 Flat Side 46 95 113 121 8