Epic Fitness Ifit Vue Version 2 English Manual - Page 20

Troubleshoot the Heart Rate Monitor If the heart rate monitor does not function properly, try the steps below. • Make sure that you are wearing the heart rate monitor as described in PUT ON THE HEART RATE MONITOR on page 17. If the heart rate monitor does not function when positioned as described, move it slightly lower or higher on your chest. • If heart rate readings are not displayed until you begin perspiring, rewet the electrode areas. • The heart rate monitor is designed to work with people who have normal heart rhythms. Heart rate reading problems may be caused by medical conditions such as premature ventricular contractions (pvcs), tachycardia bursts, and arrhythmia. • If the heart rate monitor still does not function properly, remove the sensor from the chest strap and locate the battery cover on the back of the sensor. Insert the edge of a coin into the slot in the battery cover, turn the battery cover counterclockwise, and remove the battery cover. Next, remove the old battery and insert a new CR 2032 battery; make sure that the battery is oriented so that the text is facing away from the sensor. Then, reattach the battery cover and turn it clockwise. • The heart rate monitor can also transmit to compatible BLUETOOTH Smart fitness equipment such as treadmills and ellipticals. To use the heart rate monitor with other fitness equipment, make sure that a BLUETOOTH Smart receiver is included in the fitness equipment. • For the console on other fitness equipment to display heart rate readings, you must be within arm's length of the console. • The operation of the heart rate monitor can be affected by magnetic interference from high power lines or other sources. If you suspect that magnetic interference is causing a problem, try relocating the fitness equipment. 18