Epson 1715C Installation Guide - ELPMBUNI Universal Mount Assembly - Page 15
Low-Profile Installation,
UPC - 010343858237
View all Epson 1715C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ELPMBUNI Low-Profile Installation 1. If your installation requires the overall height of the mount to be less that the approximate 9" shown with the standard mount assembly, you can convert the height to only 2 ½" by simply removing the adjustment channel as shown. 2. Once the extension channel is removed, attach the upper ceiling plate to the ceiling. 3. Once attached install the bell housing assembly to the upper ceiling plate as shown (Figure 10, Figure 11, and Figure 12). Remove the M8 x 16mm Screws, flat Washers and Star Washers Remove the Middle Extension Completely Ceiling Plate Remove the M8 x 16mm Screws, Flat Washers, and Star Washers (Both Sides) Allen Wrench Remove the M8 x 16mm Screws, Flat Washers, and Star Washers (Both Sides) Page - 16 - Figure 10 Bell Housing Installation Manual