Epson 1730W Quick Setup - Page 2

here to get help, roubleshooting - powerlite projector

Page 2 highlights

Quick Setup PowerLite 1720/1730W Using the remote control If this is your first time using the remote, make sure its batteries are installed as shown (two AA batteries). Turn projector on and off Turn off projector display and sound Display next or previous slide Access projector menu system Choose which source to display Change aspect ratio Control projector volume Navigate projector menus You can use the remote control to operate the projector. With the USB cable, you can also use the remote to change presentation slides. For more information on using the remote control, see your User's Guide. Where to get help For more information about using the projector, install the User's Guide from your projector CD. Telephone Support Services To use the Epson PrivateLine® Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card included with your projector. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of these numbers: U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday through Friday Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday through Friday Days and hours of support are subject to change without notice. Toll or long distance charges may apply. Internet Support Visit Epson's support website at epson.com/support and select your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Visit http://www.presentersonline.com to access tips, templates, and training for developing successful presentations. Register today to get product updates, special promotions, and customer-only offers. You can use the registration card or CD included with your projector, or register online at www.epson.com/webreg. Troubleshooting If you see a blank screen... If you see a blank screen or the No signal message after turning on your notebook, check the following:  Make sure the Power light on the projector is green and not flashing, and the A/V Mute slide is open.  Press the Source Search button on the projector or the Search button on the remote control to select the computer as the image source.  Press the function key on your keyboard that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as . You may have to hold down the Fn key on the notebook while pressing it. Allow a few seconds for the projector to sync up after changing the setting. If the projector and notebook don't display an image... If your image displays either on the projector or notebook, but not on both, follow the steps below. Note that some notebooks cannot display the same resolution and/or aspect ratio on both the LCD screen and the projected image. Windows Try using the CRT/LCD or key as described above. On most systems, this key lets you toggle between the LCD screen and the projector, or display on both at the same time. If that doesn't work, check your monitor settings to make sure both the LCD screen and the external monitor port are enabled. 1. From the Windows® Control Panel, open the Display utility. In Windows Vista®, right-click on the desktop and select Personalize, then select Display Settings. 2. In the Display Properties dialog box, click the Settings tab, then click Advanced. In Windows Vista, click Advanced Settings. 3. The method for adjusting the setting varies; you may have to click a Monitor tab, then make sure the external Monitor port is set as your primary display and/or enabled. See your notebook's manual or online help for details. Mac OS® X 1. From the Apple® menu, select System Preferences, then select Display or Displays. 2. Click Detect Displays. 3. Select the VGA Display or Color LCD dialog box. 4. Click the Arrangement or Arrange tab and click Mirror Displays. Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. © 2008 Epson America, Inc. 5/08 Printed in XXXXXX CPD-25570

  • 1
  • 2

If this is your first time using the remote, make sure its batteries
are installed as shown (two AA batteries).
You can use the remote control to operate the projector. With the USB
cable, you can also use the remote to change presentation slides. For more
information on using the remote control, see your
User
s Guide
.
Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2008 Epson America, Inc. 5/08
Printed in XXXXXX
Quick Setup
PowerLite
1720/1730W
CPD-25570
U
sing the remote control
W
here to get help
For more information about using the projector, install the
User
s Guide
from your projector CD.
Telephone Support Services
To use the Epson PrivateLine
®
Support service, call (800) 637-7661 and enter
the PIN on the Epson PrivateLine Support card included with your projector.
This service is available 6
AM
to 6
PM
, Pacific Time, Monday through
Friday, for the duration of your warranty period. You may also speak with
a projector support specialist by dialing one of these numbers:
U.S.
:
(562) 276-4394, 6
AM
to 6
PM
, Pacific Time, Monday through Friday
Canada
: (905) 709-3839, 6
AM
to 6
PM
, Pacific Time, Monday through Friday
Days and hours of support are subject to change without notice. Toll or long
distance charges may apply.
Internet Support
Visit Epson’s support website at
epson.com/support
and select your
product for solutions to common problems. You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson with
your questions.
Visit
to access tips, templates, and
training for developing successful presentations.
If you see a blank screen...
If you see a blank screen or the
No signal
message after turning on
your notebook, check the following:
Make sure the
Power
light on the projector is green and not flashing,
and the
A/V Mute
slide is open.
Press the
Source Search
button on the projector or the
Search
button
on the remote control to select the computer as the image source.
Press the function key on your keyboard that lets you display on an
external monitor. It may be labeled
CRT/LCD
or have an icon such as
. You may have to hold down the
Fn
key on the notebook while
pressing it. Allow a few seconds for the projector to sync up after
changing the setting.
If the projector and notebook
don’t display an image...
If your image displays either on the projector or notebook, but not on
both, follow the steps below. Note that some notebooks cannot display
the same resolution and/or aspect ratio on both the LCD screen and the
projected image.
Windows
Try using the
CRT/LCD
or
key as described above. On most systems,
this key lets you toggle between the LCD screen and the projector,
or display on both at the same time.
If that doesn’t work, check your monitor settings to make sure both the
LCD screen and the external monitor port are enabled.
1
.
From the Windows
®
Control Panel, open the
Display
utility. In
Windows Vista
®
, right-click on the desktop and select
Personalize
,
then select
Display Settings
.
2
.
In the Display Properties dialog box, click
the
Settings
tab, then click
Advanced
. In
Windows Vista, click
Advanced Settings
.
3
.
The method for adjusting the setting varies;
you may have to click a
Monitor
tab, then
make sure the external Monitor port is set
as your primary display and/or enabled.
See your notebook’s manual or online help
for details.
Mac OS
®
X
1
.
From the Apple
®
menu, select
System
Preferences
, then select
Display
or
Displays
.
2
.
Click
Detect Displays
.
3
.
Select the
VGA Display
or
Color LCD
dialog box.
4
.
Click the
Arrangement
or
Arrange
tab
and click
Mirror Displays
.
T
roubleshooting
Turn off projector
display and sound
Display next or
previous slide
Navigate projector menus
Control projector volume
Register today to get product updates, special promotions, and
customer-only offers. You can use the registration card or CD included
with your projector, or register online at www.epson.com/webreg.
Turn projector on
and off
Choose which source
to display
Change aspect ratio
Access projector
menu system