Epson 1735W User's Guide - Page 102
Adjusting Signal Settings
UPC - 010343869554
View all Epson 1735W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
5. Use the pointer button to adjust the hue and saturation. You see the adjustments reflected on the screen. When you are satisfied with the color, press Esc. 6. Repeat steps 4 and 5 for each color axis you want to adjust. You may need to readjust the color as the lamp in your projector changes over time. note You can also use the remote control's Auto button to automatically reset the projector's tracking, sync, resolution, and position settings. See page 25 for details. Adjusting Signal Settings Although the projector normally detects and optimizes the input signal automatically, you can use the Signal menu to make manual adjustments. In addition to changing the position of the projected image, you can correct tracking and sync for computer images, or change the aspect ratio to widescreen format for video images. 1. Press the Menu button and select the Signal menu. You see a screen similar to one of those below. (The settings will be different depending on the source you are projecting from.) Computer image Component video Composite video/S-video 2. Use the pointer button to highlight the desired option, then adjust it as needed: ■ Auto Setup Leave this setting on to automatically optimize the image when Computer is selected as the source. Turn it off if you want to save adjustments you have made to the video settings. ■ Resolution When set to Auto, the resolution (size) of a computer image is automatically detected so it can be scaled to fit in the 102 Fine-Tuning the Projector