Epson 1785W Quick Setup - Page 2

5 Use the arrow buttons on the remote control to highlight any of the options on the Home screen that appears, then press to select it. You can display a QR code, switch between projection sources, and quickly access various adjustment options from this screen. Using the remote control Install the batteries as shown (two AA batteries). 6 The default language of the menu system is English. To select another language, press the Menu button on the projector or remote control. Select Extended and press . Select Language and press . Select your language and press . Press the Menu button to exit the menu system. Adjust the image 1 If you don't see an image, press the Source Search button on the projector or the remote control to select the image source. Note: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press the foot release button and lift the front of the projector. Release the button to lock the foot in position. 3 To reduce or enlarge the image, turn the zoom ring. PowerLite 1781W/1785W/1795F Turn projector on and off Choose which source to display Access projector menus Navigate projector menus Turn off projector display Access the Home screen For more information on using the remote control, see the online User's Guide. Project wirelessly Follow the steps here to connect the projector over a wireless network. If you're projecting from a computer, it must have a wireless card or built-in wireless interface. 1 Press the Menu button on the remote control, select the Network menu, and press . PowerLite 1780W 4 PowerLite 1781W/1785W/1795F: To sharpen the image, press the Focus buttons on the projector or remote control. PowerLite 1780W: To sharpen the image, turn the Focus ring. PowerLite 1781W/1785W/1795F 2 Select On as the Wireless LAN Power setting. PowerLite 1780W 5 If your image looks like or , you may have placed the projector off to one side of the screen at an angle. Place the projector directly in front of the center of the screen, facing the screen squarely. If you can't move the projector, use the keystone buttons on the projector to correct the image shape. 6 Your projector automatically adjusts images that look like or , but if necessary you can press the or button on the projector to correct it.