Epson 2155W Quick Setup - Page 2

4 Press the power button on the projector or remote control. The projector beeps, the Status light flashes blue, and then stays on. Using the remote control Install the batteries as shown (two AA batteries). Note: To shut down the projector, press the power button twice. 5 Use the arrow buttons on the remote control to highlight any of the options on the Home screen that appears, then press to select it. You can display a QR code, switch between projection sources, and quickly access various adjustment options from this screen. Turn projector on and off Choose which source to display 6 The default language of the menu system is English. To select another language, press the Menu button on the projector or remote control. Select Extended and press . Select Language and press . Select your language and press . Press the Menu button to exit the menu system. Adjust the image 1 If you don't see an image, press the Source Search button on the projector or the remote control to select the image source. Note: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press the foot release button and lift the front of the projector. Release the button to lock the foot in position. Access projector menus Navigate projector menus Turn off projector display Access the Home screen For more information on using the remote control, see the online User's Guide. Project wirelessly Follow the steps here to install the included wireless LAN module and connect the projector over a wireless network. With the PowerLite 2250U, you will need the optional wireless LAN module (part number V12H731P02). If you're projecting from a computer, it must have a wireless card or built‑in wireless interface. 1 Turn off the projector and unplug the power cord. 2 Slide the air filter cover latch and open the air filter cover. 3 To reduce or enlarge the image, turn the zoom ring. 3 Remove the screw securing the wireless LAN module stopper and remove the stopper. 4 To sharpen the image, turn the focus ring. 4 Insert the wireless LAN module into the port. Note: You can also press the button on the projector to fine-tune your adjustments. See the online User's Guide for details. 5 Your projector automatically adjusts images that are unevenly rectangular on the sides ( , , , or ), but if necessary you can correct the image shape using the projector's Screen Fit feature or keystone correction buttons ( or ). See the online User's Guide for details.