Epson 2155W Operation Guide - EasyMP Multi PC Projection v2.10 - Page 23
Setting Up a Projector to Connect in Advanced Connection Mode (Wired), Parent topic, Related tasks
View all Epson 2155W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Parent topic: Selecting Projector Network Settings Related tasks Connecting to the Projector from the Software over a Network System Setting Up a Projector to Connect in Advanced Connection Mode (Wired) To connect a computer to the projector using a wired LAN, you need to select network settings on the computer and the projector. 1. Contact your network administrator and check that DHCP is available under the current network environment. Note: If DHCP is not available, write down the following values that are available for your projector. • IP Address • Subnet Mask • Gateway Address 2. Connect the computer to the network. Note: To set up a network connection, if necessary, see the documentation supplied with your computer or network adapter. 3. Connect a LAN cable to the projector. 4. Turn on the projector. 5. Press the Menu button on the remote control or the control panel, select the Network menu, and select Network Configuration. 6. Select Wired LAN. 23