Epson 2200 Printer Basics - Page 68
ink button. The printer begins, power light and red - printer cartridges
UPC - 010343841840
View all Epson 2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
5. Shake the new cartridge four or five times before opening its package. (Don't shake it after it's unpacked.) 6. Remove the new cartridge from its package. Caution: Don't touch the green circuit board on the back of the cartridge; you may inhibit normal operation and printing. 7. Slide the new cartridge into its slot. The side with the green circuit board goes in the back of the slot. 8. Press the cartridge down until it clicks into place. 9. If you need to replace any other ink cartridges, repeat steps 4 through 8 before continuing with step 10. Cartridge cover 10. Close the cartridge cover, then close the printer cover. 11. Press the H ink button. The printer begins charging the ink delivery system. The green P power light and red H ink lights flash and the printer makes noise. Charging takes about a minute. When it's finished, the green P power light stops flashing and stays on, and the red H ink lights go out. Close cartridge cover and printer cover, then . . . press H ink button Caution: Never turn off the printer while the green P power light is flashing, unless the printer hasn't moved or made noise for more than 5 minutes. 62 Maintaining Your Printer