Epson 2265U Quick Setup - Page 3

5 Replace the wireless LAN module stopper and secure it using the screw you removed. 6 Close the air filter cover. 7 Plug in the power cord and turn on the projector. 8 Press the Menu button on the remote control, select the Network menu, and press . 9 Choose Network Configuration and press . 10 Select the Wireless LAN menu and press . 11 Choose Connection Mode, press , select Quick (for a direct connection to a computer, tablet, or smartphone) or Advanced (for a connection to a router or access point), then press again. When you're finished, press Esc to return to the Wireless LAN menu. 12 If you chose the Advanced connection mode, select Search Access Point and press . Use the arrow buttons to highlight your network name (SSID) in the list of available connections. 13 If your network has security enabled, enter your network password on the screen that appears. Make sure to enter any uppercase or lowercase letters in the correct case. 14 If you chose the Advanced connection mode, select IP Settings and press . If your network assigns addresses automatically, make sure DHCP is turned on. If not, turn off DHCP and enter the projector's IP Address, Subnet Mask, and Gateway Address, as needed. 15 To prevent the SSID and IP address from appearing on the network standby screen, set the SSID Display and IP Address Display settings to Off. 16 When you're finished selecting settings in the Wireless LAN menu, press Esc. 17 Select Complete and press save your settings. , then select Yes and press again to Install network software Links to download the network software and to the manuals are available from the projector CD. Downloads require an Internet connection. You can also download the software and manuals from the Epson website, as described in "Where to get help." To monitor and control your projector over the network, install the EasyMP® Monitor software (Windows® only). To project from multiple PCs over the network, install the EasyMP Multi PC Projection software. To update your projector's firmware over a wired LAN, install the EasyMP Network Updater software. Click the icons on your desktop to view the software manuals. See the manuals for instructions on installing and using the software. Project wirelessly from a mobile device You can connect your mobile device and projector using Epson iProjection™ and a QR code. Make sure the latest version of Epson iProjection is installed on your device. Install the Epson iProjection app To project from an iOS or Android™ device, download and install the Epson iProjection app. Visit www.epson.com/projectorapp (U.S.) or www.epson.ca/projectorapp (Canada) for more information. Direct wireless connection Make sure your device and Epson projector are not connected to a network and your Epson projector's Connection Mode is set to Quick. 1 Press the Home button on the projector or remote control to bring up the Home screen. 2 Select Display the QR Code and press . 3 Tap iProjection on your device's Home screen. •• To select a number or character, use the arrow buttons on the remote control to highlight it, then press . •• To switch between uppercase and lowercase letters, select CAPS and press . •• To change the displayed symbols, select SYM1 or SYM2 and press . When you're finished entering the network password, select Finish and press . 4 Tap Read QR code. 5 Point your device's camera at the QR code your projector displays; the QR code is read automatically. 6 If you are using an iOS device, follow the on-screen prompts to register your projector's Wi-Fi profile. Your device and Epson projector are now connected.