Epson 3LCD Quick Start - Page 4
Plug in and turn - projector troubleshooting
UPC - 010343857827
View all Epson 3LCD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
4 Plug in and turn on 1 Open the lens cover. 2 Connect the power cord to the projector and plug the other end into an electrical outlet. The Power light turns orange. 3 Press the Power button on the projector or remote control. You hear a beep, the Power light flashes green, and the projector lamp comes on in about 4 seconds. The Power light stays green. 4 Start your video or presentation. If you have connected more than one video source, use the Source buttons on the remote control to select the one you want to watch. NOTE If you connected a notebook computer and no image is being projected, you may need to set up the notebook to output signals externally. See the Troubleshooting section for instructions. Source buttons Turning off the projector 1 Press the Power button on the projector or remote control. 2 When you see the confirmation message, press the Power button again. 3 When the projector beeps twice and the Power light turns orange, unplug the projector.