Epson 410W Quick Setup
Epson 410W - PowerLite WXGA LCD Projector Manual
 |
UPC - 010343873407
View all Epson 410W manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson 410W manual content summary:
- Epson 410W | Quick Setup - Page 1
PowerLite® 410W Quick Setup 1 Unpack the projector You should have the following items: Projector and lens cover Power cord Remote control and batteries Computer cable Projector CD-ROMs Password protected sticker Remove the protective pad from the lens cover and save it for transporting the - Epson 410W | Quick Setup - Page 2
If you project upside-down from a wall or the ceiling, or from the rear, you'll need to select the correct projection option in the projector's Extended menu. See the User's Guide on your CD-ROM for instructions. The distance between the projector and the screen determines the size of the image, and - Epson 410W | Quick Setup - Page 3
optional video and audio cables through Epson or an electronics store. • You can connect up to 4 video devices and use the remote control to switch between them. control the projector over a network, you can connect a network cable. See the User's Guide on your CD-ROM for instructions. Turn over - Epson 410W | Quick Setup - Page 4
end into an electrical outlet. The power light on the projector turns orange. 3 Turn on your computer or video source. 4 Press the Power button on the projector or remote control. The projector beeps, the power light flashes green, and the projector lamp comes on in about 5 seconds. 5 Start - Epson 410W | Quick Setup - Page 5
the Color Mode button on the remote control repeatedly to move through the options. Color Mode button See your User's Guide on the CD-ROM for more information about image adjustments. 7 Install your manuals and register your projector 1 Insert the PowerLite projector CD-ROM in your drive. If - Epson 410W | Quick Setup - Page 6
and select your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Speak to a support representative To use the Epson PrivateLine® Support service, call (800) 637-7661 and enter the PIN
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
Quick Setup
PowerLite
®
410W
1
Unpack the projector
You should have the following items:
Remove the protective pad from the lens cover and save it for transporting
the projector.
Avoid touching the lens with your bare hands to prevent damage
to the lens surface.
2
Set up the remote control
1
Remove the battery cover.
2
Insert the batteries.
3
Replace the battery cover.
Projector and lens cover
Power cord
Computer cable
Projector
CD-ROMs
Password protected
sticker
Remote control
and batteries
*411643300*
*411643300*