Epson 410W Quick Setup - Page 4

5 Plug in and turn on 1 Remove the lens cover. 2 Connect the power cord to the projector and plug the other end into an electrical outlet. The power light on the projector turns orange. 3 Turn on your computer or video source. 4 Press the Power button on the projector or remote control. The projector beeps, the power light flashes green, and the projector lamp comes on in about 5 seconds. 5 Start your video or presentation. If you have connected more than one video source, use the Source Search button on the projector or remote control to select the one you want to watch. NOTE If your image does not appear on the screen, see the Troubleshooting section for help. Turning off the projector 1 If you're using a computer, shut it down first, while you can still see the display. 2 Press the Power button on the projector or remote control. 3 When you see the confirmation message, press the Power button again. The projector beeps twice and the power light turns orange. With Epson's Instant Off® technology, there's no cool-down period. When you're done, just unplug the projector and it's ready to travel.