Epson 4900 Warranty Statement - Page 8
Repackaging and Transportation Instructions, NOTES, INSTRUCTIONS, CAUTION, WARNING, User's Guide
View all Epson 4900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
EPSON® PreferredSM Limited Warranty Program for the Epson Stylus® Pro 17-inch Wide Format Printers return. (For details on packaging and shipping, please see "Repackaging and Transportation Instructions" below.) Repackaging and Transportation Instructions: To avoid permanently damaging the printer, it is extremely important that you follow the instructions below when preparing to ship or transport the printer. (Please refer also to the additional instructions in your User's Guide.) NOTES: • In case shipment of the printer for service becomes necessary, to prevent un-repairable damage to the printer, the printer should be packaged in its original box and packaging materials and secured to a pallet. If you do not have these items, you must contact Epson and Epson will supply appropriate items for your shipment. • Have at least two people lift the printer when packaging or transporting it. INSTRUCTIONS: 1) Turn on the printer. 2) Remove any paper or other media in the printer. Remove the roll paper spindle and paper tray. Note: Remove any partially used cartridges. To store any partially used cartridges that you take out before shipment, tape over the needle valve hole until you are ready to use the cartridges again. 3) Turn off the printer. Make sure the print head is in the home (far right) position. CAUTION: Do not turn off the printer by unplugging it or turning off a power strip. You will not be able to lock the print head in the home position, and ink left inside the reservoir will leak out, damaging the printer. 4) If you have installed any optional components, remove them before shipping. WARNING: Components may be hot. After turning off and unplugging the printer, make sure you allow each component to cool before handling it.