Epson 585W Installation Guide - Page 28
Determine the projection distance and pull out the slider, Route the cables through the wall mount arm
![]() |
View all Epson 585W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
8. Tighten the nut with a wrench to secure the wall plate to the wall. D Determine the projection distance and pull out the slider 1. Using the tables on pages 14 to 21, check the number for the slider measure (b). 2. Loosen the M4 x 12 mm hexagon socket head cap bolts (x2), and then pull out the slider on the wall mount. Align the slider with the measure (b+x) that is equal to the slider measure (b) plus the thickness of the projection screen (x). M4 x 12 mm hexagon socket head cap bolts (x2) Slider measure E Route the cables through the wall mount arm 28
![](/manual_guide/products/epson-brightlink-575wi-installation-guide-b28d747/28.png)
28
8.
Tighten the nut with a wrench to secure the wall plate to the wall.
D
Determine the projection distance and pull out the slider
1.
Using the tables on pages 14 to 21, check the number for the slider measure (b).
2.
Loosen the M4 x 12 mm hexagon socket head cap bolts (x2), and then pull out the slider on the wall
mount.
Align the slider with the measure (b+x) that is equal to the slider measure (b) plus the thickness of the
projection screen (x).
E
Route the cables through the wall mount arm
M4 x 12 mm hexagon socket head cap bolts (x2)
Slider measure