Epson 6040UB Users Guide - Page 133
Solutions When Only a Partial Image Appears, Solutions When the Image is Not Rectangular
View all Epson 6040UB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
• Check the input resolution under Projector Info in the Info menu and make sure that the projector supports that resolution. Parent topic: Solving Image Problems Related references Input Signal Settings - Signal Menu Projector Setup Settings - Extended Menu Supported Video Display Formats Solutions When Only a Partial Image Appears If only a partial computer image appears, try the following solutions: • Try adjusting the image position using the Position menu setting. • Try adjusting the image position using the Lens button on the remote control or control panel. • Press the Aspect button on the remote control to select a different image aspect ratio. • Select a different image aspect ratio in the Signal menu. • Check the cables connecting the computer or video source to the projector. Try connecting different cables. • Check your computer display settings to disable dual display and set the resolution within the projector's limits. (See your computer manual for details.) • Check the resolution assigned to your presentation files to see if they are created for a different resolution than you are projecting in. (See your software help for details.) Parent topic: Solving Image Problems Related references Input Signal Settings - Signal Menu Supported Video Display Formats Solutions When the Image is Not Rectangular If the projected image is not evenly rectangular, try the following solutions: • Place the projector directly in front of the center of the screen, facing it squarely, if possible. • Try to fix the image using lens shift before adjusting the Keystone setting. • If you adjusted the projector height using the projector feet, press the keystone buttons on the projector to adjust the image shape. 133