Epson 685Wi Operation Guide - EasyMP Monitor v4.57 - Page 9
User's Guide, Set Standby Mode to Communication On or Network On., Set Network Monitoring to On. - installation guide
View all Epson 685Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Installing EasyMP Monitor 9 • Depending on the projector model, a commercially-available serial W TCP/IP conversion adapter and a connection cable are required in order to use EasyMP Monitor. See your projector's User's Guide. Make the settings for the serial W TCP/IP conversion adapter before connecting to the projector. q To enable projectors to be monitored and controlled even when they are in standby mode*, make the following settings at the projectors. The settings that need to be made will vary depending on the projector you are using. See your User's Guide for more information. • Set Standby Mode to Communication On (or Network On). • Set Network Monitoring to On. * When the projector's indicator is lit orange.
Installing EasyMP Monitor
9
•
Depending on the projector model, a commercially-available serial
W
TCP/IP conversion adapter and a connection cable are required in
order to use EasyMP Monitor. See your projector's
User's Guide
.
Make the settings for the serial
W
TCP/IP conversion adapter before
connecting to the projector.
q
To enable projectors to be monitored and controlled even when they are in
standby mode
*
, make the following settings at the projectors. The settings
that need to be made will vary depending on the projector you are using.
See your
User's Guide
for more information.
•
Set Standby Mode to Communication On (or Network On).
•
Set Network Monitoring to On.
* When the projector's
indicator is lit orange.